6
Sep

Deep Fried Everything and Azeri Cuisine


For my birthday my Dear gave me a deep fryer. I usually avoid deep-frying stuff to show some concern for my health, but I do like fried foods like everyone else so this was a welcome gift. I’d feel too guilty to buy myself a deep fryer, even if it would make a good addition to my galley gear. It requires at least 750mL of oil to start cooking– not exactly frugal, but it does go a long way.


So two weeks ago I finally used the deep fryer, frying everything I can put my hands on. I began with a lunch of deep fried sausages and eggplant. For dinner, I fried potato wedges, Vienna sausages, and some canned salmon. The following day, I fried some Thai-style chicken wrapped in pandan leaves bought from SM. After which I had to reluctantly throw away the oil– I don’t usually consume 750mL of canola oil for just three meals.


This week I tried my hand at making saciçi, that afritada-like Azeri chicken dish I had in Baku. I departed from the original recipe though– I used olive oil and butter instead of pure butter, I added a lot of garlic, and I cooked it with orange juice and slices. Also, I used bigger cuts of chicken and vegetables in my saciçi so I had to use more water while cooking; thus, the ensuing dish had a lot more sauce. It’s quite greasy due to the copius amount of butter, but the orange cuts through it a little bit. It was quite close to the saciçi I had in Baku, though I wish I used less water so the chicken and vegetables could’ve fried more. Next time I’ll use smaller cuts of chicken.

Finally, just saw a video on Azeri cuisine:

Now I’m officially looking for a good Azeri (i.e., Turkish) restaurant in Manila.  Any leads?

19
Jun

Galley Gear

This is my first post here, being the newest member of this group (thanks for the invite, Arbet).  I actually have a 10-month-old food blog, but this is the first time I’m collaborating with like-minded (and like-lifestyled) individuals.  So in keeping with the theme of this blog let me beef up my bachelor-cred.

I run what could be described as a typical bachelor (or bachelorette) kitchen. This would be the kitchen of a single-person household, the occupant mostly cooking for himself plus the occasional visitor. “Home” cooking (if any) is reserved for weekends, while weekday cooking mainly consists of frying, reheating, or opening packages.  Space is of a premium, so most equipment will have be stowable (thus, a galley), and a lot of the items would be hand-me-downs from family or friends. Here’s a rundown of my gear:

1. convection oven (Imarflex Turbo Broiler, c. early 80’s)
2. microwave oven (Chefmaster, 1988)
3. rice cooker (3D, c. early 90’s)
4. electric stove (Asahi, 2004)

That’s it. As you can see, my equipment is very limited and most are more than 15 years old. It’s true what they say though– the older models are sturdier. Even my electric stove is old school: all metal with three coils that turn red (one for each setting).  With these simple equipment I’ve cooked quite a few dishes, some more edible than others, but all of them satisfying.  Dishes that are a home-made break from the bachelor staples of fried cured meats (and eggs), canned goods, instant dinners, and takeaways.

All the stuff I make is bachelor friendly, sticking to dishes that can be made quickly, are amenable to storing and reheating, and don’t require a culinary arts diploma.  I already have a bunch of recipes in my other blog— 10 at last count– all of which can be made using my simple gear.  I’ll be posting similar recipes here, along with the occasional review and trivia.  Recipes to use when Spanish sardines, spam and eggs, and frozen sisig don’t quite cut it anymore.

28
May

Are you cheap with kitchen stuff?


(This is my first post here, and I thank Arbet for granting me the honor although, technically, I’m not a bachelor anymore. 😉 Comic credit: Stove Ownership by XKCD)

When a bachelor decides to cook “for real” (that is, use a stove and pots and pans instead of a microwave oven) he has to go through this unimaginably excruciating process of deciding what stuff to get.

Of course, of prime consideration is budget. It might occur to him to scrimp on cooking stuff because he’d probably use the stuff only half the time (eating out and, well, microwaving stuff on the other half). But he only needs to remind himself that a.) he’s playing with fire and b.) he’s dealing with stuff he puts in his mouth to realize that being cheap with kitchen stuff isn’t worth the risk.

Of course I learned part of this lesson the hard way.

The only stuff I didn’t scrimp on was the stove. While I didn’t get an expensive La Germania, I took a Nikon dual-burner for 750 pesos and a 400+ peso gas regulator. Fire is something I really didn’t even want to entertain — but I didn’t want to get an electric stove either (curse you Meralco!). I also got a model with automatic ignition — didn’t want to bother with lighters, lighter fluid, and matches anyway.

The pots and pans were a different story. I found these cheap China-made pans in SM Hypermarket that sold for 275 pesos. That’s for 20″, 24″, and 28″ frying pans. I also got a stainless steel pot, a nylon turner/spatula (the one you use for frying), a steel can opener and a steel ladle. I got the cheapest ones I could find. I’m all set.

First sign of trouble came with the can opener. It just wasn’t… sharp enough. It cut through the can on the first “bite” came through fine, but when you turned the handle it just went up the can cover and made a shallow dent.

Crap. I borrowed a can opener from a neighbor just to be able to eat breakfast.

A few weeks later and it was evident just how cheap the pans and the turner were. Plastic flakes was coming off of the turner’s edge, and the non-stick coating on the small and medium pans were mottling after just a few days use. The worst story was the large 28″ pan. The moment I picked it up filled with food, the pan handle just gave. And that was the first time that pan was used.

Crap! Good thing the food did not spill.

When the non-stick material on the cheap pans just whittled away after a few weeks, I finally gave them up and decided to get real pans. Good thing some branded, Teflon coated pans were on sale in SM. Got thicker pans with real Teflon on them for half the price. Great. All of the cheap China pans were retired.

But there’s no such thing as a coincidence, and one of the Teflon pans revealed its reason to come into my kitchen a few weeks later.

I woke up a little earlier than usual, and decided to have the longganisa that I requested that had come from Pangasinan. I got a Teflon pan, put water in it, brought the water to a boil, put in the longganisa. Then, for some reason, I put down the nylon turner ON the pan’s edge, and sat down, waiting.

And fell asleep.

Shit happens when you mix cooking and sleep, of course.

I woke up with the loud sizzling on the pan and the stench of burning plastic. SHIT. I stood up and hurried to the stove to find the nylon turner melted three fourths of its way through the pan’s edge. SHIT! I turned the fire off, picked pan and turner, hurried to the sink and turned on the water.

It was too late. Sticky, molten plastic had trickled down both the inner and outer surface of the pan, with small particles dribbling within the oil that was supposed to cook my breakfast/baon. The turner was beyond repair, and I had lost 8 pieces of absolutely delicious but carcinogen-coated longganisa. Worse, a thick blob of plastic stuck itself on a 500 peso frying pan!

Frustrated, I threw the turner and longganisa in the trash, and poured dishwashing liquid on the pan. Hoping against hope, I scrubbed on the cooking surface of the pan — and just like that, the blob of hardened plastic detached itself from the cooking surface. I was surprised, but then it occurred to me: Teflon was supposed to do this, that is, keep stuff from sticking to it permanently. And that’s why it’s that expensive.

Unfortunately the plastic that dried on the outer surface of the pan won’t come off as easily. It continues to cling to the pan as a reminder of that whole disaster.

I now use a stainless steel turner, making sure I do not scrape the Teflon surface too hard.